Hi, friends. I could use some advice on the right computer for Sketchup/CAD. My wife's a landscape-architect-in-training who's doing a lot of Sketchup and AutoCAD at home. Her computer is slow, but then I understand that pretty much ALL 3D design work can bog down the best computers, so we're wondering whether we can actually improve things without dropping thousands on a custom build.

We're looking at a specific, relatively inexpensive Beelink box as a possible upgrade, and wondering whether it's (a) adequate, and (b) would be a noticeable improvement over her current laptop. If not, what WOULD folks recommend for a reasonable price?
Here are the specs for the two computers (current and prospective):

Current: Lenovo Ideapad 330-17IKB:
Intel Core i5-9250U (4 cores, 8 threads, 1.6-3.4 GHz, 6 MB smart cache)
Intel® UHD Graphics 620 (integrated, not a separate card)
500 GB HDD
12 GB RAM (maxed out)
https://support.lenovo.com/us/en/sol...view-330-17ikb and https://ark.intel.com/content/www/us...-3-40-ghz.html and https://psref.lenovo.com/syspool/Sys...17IKB_Spec.PDF

Proposed: Beelink SER3 Mini PC:
AMD Ryzen 7-3750H (4 cores, 8 threads, 2.3GHz base, boost max 4.0 GHz, 4MB smart cache)
Radeon RX Vega 10 graphics (integrated, not a separate card)
16 MB RAM (room to upgrade to 32)